Other External Components; Using A Camera - Kenwood DDX9016S Instruction Manual

OTHER EXTERNAL COMPONENTS

Using a camera

• To connect a camera, see page 74.
• To use a rear view camera, a REVERSE lead
connection is required. (Pages 70 and 71)
❏ Settings for the camera
1
Display the source/option selection screen.
On the Home screen or the source control
screen:
2
Display the <SETUP> screen.
3
Display the <Camera> screen.
4
Configure the camera settings.
• Scroll the page to show more items.
36
Setting items
[R-CAM • ON: Displays the picture from
Interruption] the rear view camera when you
shift the gear to the reverse (R)
position.
• OFF (Initial): Select this when no
camera is connected.
[Parking • ON (Initial): Displays the parking
Guidelines] guidelines to enable easier
parking when you shift the gear
to the reverse (R) position.
• OFF: Hides the parking
guidelines.
[Guidelines Adjusts the parking guidelines
Setup]
according to the size of the car,
parking space and so on. (See the
right column.)
[Front Camera] • ON: Activates the front view
camera. Select this to use the
front view camera.
• OFF (Initial): Select this when no
camera is connected.
[Front Camera • ON: Displays the picture
Mirror Image]
from the front view camera
horizontally reversed.
• OFF (Initial): Displays the picture
from the front view camera as
it is.
Adjusting the parking guidelines
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1
Touch [Guidelines Setup] on the
<Camera> screen. (See the far left
column.)
The guidelines settings screen is displayed.
2
Touch one of the marks to adjust (1),
then adjust the position of the selected
mark (2).
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Touch [Initialize] and after touch [Yes] to set
all the marks to the initial default position.