Kenwood DDX9016S Instruction Manual page 41

BLUETOOTH
Auto pairing
When <Auto Pairing> is set to [ON], iOS devices
(such as iPhone) are automatically paired when
connected via USB. (Page 49)
Pairing a Bluetooth device from the target device
1
Search for the unit ("DDX****") from your
Bluetooth device and operate the device
to register.
For a Bluetooth device compatible with SSP
(Bluetooth 2.1):
Confirm the request both on the device and the
unit.
012345
KENWOOD BT
OK
MM-8U2
• Touch [No] to reject the request.
For a Bluetooth device compatible with
Bluetooth 2.0:
Select the unit (
device.
• If a PIN code is required, enter the PIN code
shown on the screen (initial: "0000").
– To change PIN code, see page 43.
PIN code
2
Determine usage as a mobile phone.
0000
OK
• To use the Bluetooth device as a mobile
phone, select the hands free number ([Hands
Free1] or [Hands Free2]) to connect the
device for.
• When you do not want to use the Bluetooth
device as a mobile phone, select [No
Connection.].
• To close the window, touch [Close].
"DDX****"
) on your Bluetooth
3
When your Bluetooth device is compatible
with A2DP or SPP: Determine usage as
an audio player or a device with Apps
installed.
• To use the device as an audio player, touch
[Yes].
• When you do not want to use the Bluetooth
device as an audio player, touch [No].
4
When your Bluetooth device is compatible
with PBAP: Select whether to transfer the
phonebook of your Bluetooth device to
the unit or not.
• To transfer the phone book from your
Bluetooth device, touch [Yes].
• When you do not want to transfer the phone
book, touch [No].
ENGLISH 41