Connecting External Components - Kenwood DDX9016S Instruction Manual

CONNECTION/INSTALLATION
❏ Connecting the Wireless Display
Adapter to use smartphone/iPod/
iPhone over a wireless connection
Wireless Display Adapter: KCA-WL100 (optional accessory)
❏ Connecting external components
VIDEO OUT
REAR VIEW CAMERA
FRONT VIEW CAMERA
AV-IN
74
1 HDMI/MHL input
2 Video output (Yellow)
3 Rear view camera input (Yellow)
4 Front view camera input (Yellow)
5 TV tuner remote control output
6 Audio Video input (AV-IN1)
7 Audio Video input (AV-IN2)
8 Digital Radio antenna input*
1
9 AV-OUT/Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
p Front preout*
2
• Audio left output (White)
• Audio right output (Red)
q Subwoofer preout (monaural output)*
• Subwoofer left output (White)
• Subwoofer right output (Red)
w Rear preout*
2
• Audio left output (White)
• Audio right output (Red)
e Steering wheel remote controller input
• Connect to the vehicle's steering remote
harness using the Steering Remote cable (8).
Contact your Kenwood dealer for details.
r NAV I/F input
*
1 Only for DDX9016DABS.
* When connecting an external amplifier, connect its ground wire to
2
the chassis of the car; otherwise the unit may be damaged.
Connecting external amplifiers for 3 way
speakers system (only for DDX9016S Region 3/
DDX916WS Region 3)
2
Speaker
*
* When connecting to an external amplifier, connect its ground wire
to the car's chassis.
Tweeter preout
Mid range preout
Woofer preout
RCA cable (not supplied)