Bluetooth - Kenwood DDX9016S Instruction Manual

BLUETOOTH

Information for using Bluetooth®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such
as mobile phones, portable PCs, and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Notes
• While driving, do not perform complicated
operations such as dialing numbers, using the
phone book, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
About mobile phones compatible with Phone
Book Access Profile (PBAP)
If your mobile phone supports PBAP, you can
display the phone book and call lists on the
touch panel screen when the mobile phone is
connected.
• Phone book: up to 1000 entries
• Dialed calls, received calls, and missed calls: up
to 50 entries in total
40
Connecting Bluetooth devices
❏ Activating/deactivating the Bluetooth
function
When you use the Bluetooth device, activate the
Bluetooth function on the unit.
1
Display the source/option selection screen.
On the Home screen or the source control
screen:
2
Display the <SETUP> screen.
3
Display the <Bluetooth Setup> screen.
4
Activate ([ON]) or deactivate ([OFF]) the
Bluetooth function.
❏ Registering and connecting a new
Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, pair the unit and the device. Pairing
allows Bluetooth devices to communicate with each
other.
• You cannot register the Bluetooth device when
you are using the following sources: "Bluetooth",
"iPod", "Android Auto", "Apple CarPlay", or
"Mirroring". If you want to register the Bluetooth
device while using one of the above mentioned
sources, send the connection request from the
Bluetooth device and register it.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1: You can pair the
device and the unit using SSP (Secure Simple
Pairing) which only requires confirmation.
– For devices with Bluetooth 2.0: You need to
enter a PIN code both on the device and unit for
pairing.
• You can register up to 10 devices in total.
• Two Bluetooth devices can be connected at a
time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are displayed
when the information is acquired from the device.