Kenwood DDX9016S Instruction Manual page 47

BLUETOOTH
Voice dialing
• Available only when the connected mobile phone
has a voice recognition system.
1
Activate voice dialing.
• You can also activate voice dialing by holding
/VOICE on the monitor panel.
2
Say the name of the person you want to
call.
• If the voice command is not recognized, touch
[Restart], then say the name again.
To cancel voice dialing: Touch [Stop].
❏ Presetting phone numbers
You can preset up to 10 phone numbers.
1
Display the preset list. (Page 45)
2
3
Select a position to store into.
4
Select a method to add a phone number to
preset list, then register the number to the
preset list.
[Add Select a phone number from
number from
the phonebook (Page 46).
phonebook]
[Add number Enter a phone number on the
direct]
direct number entry screen,
then touch [Set] to add to the
preset list.
• To close the window, touch [Close].
• To display the preset list, touch [
control screen.
To delete a phone number from the preset list:
Select the phone number to delete on the <Edit
Preset Dial> screen, then touch [Delete] on the
<Edit Preset Number> window.
To delete all phone numbers from the preset list:
Touch [Delete all] on the <Edit Preset Dial> screen.
] on the phone
ENGLISH 47