Replacing A Turn Signal Light Bulb; Replacing The Auxiliary Light Bulb - Yamaha TDM900 Owner's Manual

Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Turn signal light lens
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24202
2
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
1
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
Replacing the auxiliary light
bulb
1
1. Auxiliary light lens
2. Screw
ECA11190
6-33
1. Remove the auxiliary light lens by
removing the screws.
1
2
2. Remove the defective bulb by pull-
ing it out.
EAU38900
2
3
4
5
6
7
8
9