Adjusting The Engine Idling Speed - Yamaha TDM900 Owner's Manual

WARNING
G
Before installing the fuel tank,
make sure that the fuel hoses
are not damaged. If any fuel
hose is damaged, do not start
the engine but have a Yamaha
dealer replace the hose, other-
wise fuel may leak.
G
Make sure that the fuel hoses
are properly connected and
routed, and not pinched.
G Be sure to place the fuel tank
breather hose and the fuel tank
overflow hose in the original po-
sition.
1
1. Fuel tank breather/overflow hose
2. Fuel hose
PERIODIC MAINTENANCE AND MINOR REPAIR
EWA11330
1. Original position (paint mark)
10. Install the panels and cowlings.
11. Install the seat.
2
Adjusting the engine idling
speed
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
1
The engine should be warm before
making this adjustment.
NOTE:
The engine is warm when it quickly re-
sponds to the throttle.
Check the engine idling speed and, if
necessary, adjust it to specification by
turning the idle adjusting screw. To in-
crease the engine idling speed, turn the
screw in direction (a). To decrease the
engine idling speed, turn the screw in
direction (b).
6-15
EAU34300
2
3
4
5
6
7
8
9