Removing A Wheel; Installing A Wheel - Yamaha GRIZZLY 125 YFM125GA Owner's Manual

1
1
2
3
4
5
6
1. Tail/brake light bulb
2. Tail/brake light bulb holder
7
3. Insert a new bulb into the bulb holder, push it
8
in, and then turn it clockwise until it stops.
4. Install the bulb holder (together with the bulb)
9
by turning it clockwise.
10
EBU25651

Removing a wheel

11
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
2
1. Wheel nut
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU25692

Installing a wheel

1. Place the ATV on a level surface.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Install the wheel and the nuts.
8-47
1
1