Removing A Wheel - Yamaha GRIZZLY 550 2013 Owner's Manual

1. Tail/brake light bulb holder
3. Remove the burnt-out bulb by pushing it in
and turning it counterclockwise.
8
1. Tail/brake light bulb
4. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
5. Install the bulb holder (together with the bulb)
by turning it clockwise.
6. Install the panel.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Wheel nut
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
8-64