Cleaning The Engine And V-Belt Case Air Filter Elements - Yamaha GRIZZLY 125 YFM125GA Owner's Manual

Recommended transmission oil:
See page 10-1.
1
Oil quantity:
0.6 L (0.63 US qt, 0.53 Imp.qt)
2
7. Check the oil filler bolt gasket for damage, and
3
replace it if necessary.
8. Install the oil filler bolt and its gasket, and then
4
tighten the bolt to the specified torque.
5
Tightening torque:
Transmission oil filler bolt:
6
23 Nm (2.3 m·kgf, 17 ft·lbf)
7
ECB01061
NOTICE
8
Make sure that no oil gets on the tires or
wheels.
9
9. Start the engine, and then let it idle for several
10
minutes while checking the transmission for
oil leakage. If oil is leaking, immediately turn
11
off the engine and check for the cause.
10. Turn the engine off, and then check the oil lev-
el and correct it if necessary.
EBU23846
Cleaning the engine and V-belt case air
filter elements
Both air filter elements should be cleaned at the
specified intervals in the periodic maintenance
chart.
Engine air filter element
TIP
There is a check hose at the bottom of the air filter
case. If dust or water collects in this hose, empty
the hose and clean the air filter element and air fil-
ter case.
1. Air filter case check hose
8-15
1