Tail/Brake Light; Removing A Wheel; Installing A Wheel - Yamaha YFZ450R 2017 Owner's Manual

EBU26921

Tail/brake light

This model is equipped with an LED type of
tail/brake light.
If the tail/brake light does not come on, have a
Yamaha dealer check it.
EBU25652

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Wheel nut
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU27484

Installing a wheel

1. Install the wheel with the arrow mark pointing
in the forward rotating direction of the wheel,
and then install the wheel nuts.
3
1. Arrow mark
2. Forward rotating direction
3. Wheel nut
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torques.
8-49
2
3
8