Yamaha GRIZZLY 125 YFM125GA Owner's Manual page 83

8. Install the transmission oil filler bolt and its
gasket, and then tighten the bolt to the speci-
fied torque.
Tightening torque:
Transmission oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
To change the transmission oil
1. Place the ATV on a level surface.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Place an oil pan under the transmission to col-
lect the used oil.
4. Remove the transmission oil filler bolt, the
transmission oil drain bolt and their gasket to
drain the oil from the transmission case.
1
1. Transmission oil drain bolt
2. Gasket
5. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
Tightening torque:
Transmission oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
6. Refill with the specified amount of the recom-
mended transmission oil. NOTICE: Make
sure that no foreign material enters the
transmission case.
8-14
2
1
[ECB00791]
1
2
3
4
5
6
7
8
9
10
11