Operation; Starting A Cold Engine - Yamaha GRIZZLY 125 YFM125GA Owner's Manual

EBU19881
1
EBU19901
2
Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
3
understand, ask your Yamaha dealer.
EWB00631
4
WARNING
5 Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
6
vent any loss of control, which could cause an
accident or injury.
7
EBU29720
8

Starting a cold engine

ECB00150
9
NOTICE
See the "Engine break-in" section on page 6-4
10
prior to operating the engine for the first time.
11
1. Set the parking brake.
2. Turn the fuel cock to "ON".
3. Turn the key to "ON" and the engine stop
switch to " ".
4. Shift the drive select lever into the neutral po-

OPERATION

sition. The neutral indicator light should come
on. If the indicator light does not come on,
have a Yamaha dealer check the electrical cir-
cuit.
TIP
The engine can be started only when the drive se-
lect lever is in the neutral position.
5. Use the starter (choke) in reference to the fig-
ure:
Position (1):
Cold engine start with ambient temperature
below 5 °C (40 °F).
Position (2):
Cold engine start with ambient temperature
between 0 °C (30 °F) and 30 °C (90 °F).
Position (3):
Cold engine start with ambient temperature
above 25 °C (80 °F).
6-1