Yamaha GRIZZLY 125 YFM125GA Owner's Manual page 111

3
1. Battery
2. Negative battery lead (black)
3. Positive battery lead (red)
2. Remove the battery.
To store the battery
G
If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.
G
If the battery will be stored for more than two
months, check the specific gravity of the electro-
lyte at least once a month and fully charge the
battery whenever necessary.
ECB01100
1
2
G
G
To install the battery
TIP
Be sure the battery is fully charged.
8-42
NOTICE
Always keep the battery charged. Storing a
discharged battery can cause permanent
battery damage.
Do not leave or store the battery on its side.
1. Install the battery.
2. Connect the positive lead first, and then con-
nect the negative lead. NOTICE: When in-
stalling the battery, the main switch must
be off, and the positive lead must be con-
nected before the negative lead.
3. Make sure that the breather hose is properly
routed, in good condition, and not obstructed.
NOTICE: If the breather hose is positioned
in such a way that the frame is exposed to
electrolyte or gas expelled from the bat-
tery, the frame could suffer structural and
external damages.
[ECB01110]
[ECB00611]
1
2
3
4
5
6
7
8
9
10
11