V-Belt Case Drain Screw - Yamaha GRIZZLY 125 YFM125GA Owner's Manual

EWB02340
WARNING
1
Do not start the engine when cleaning the
spark arrester, otherwise it could cause injury
2
to the eyes, burns, carbon monoxide poison-
ing, possibly leading to death, and start a fire.
3
Always let the exhaust system cool prior to
touching exhaust components.
4
EBU30060
5

V-belt case drain screw

After riding in water deep enough to allow it to en-
6
ter the V-belt case, remove this screw to drain the
water from the case.
7
TIP
8
If water drains from the V-belt case after removing
the screw, have a Yamaha dealer check the ATV
9
as the water may affect other engine parts.
10
11
1
1. V-belt case drain screw
2. Gasket
To drain the water from the V-belt case
1. Place the ATV on a level surface.
2. Place a container under the V-belt case, and
then remove the V-belt case drain screw and
its gasket to drain the water from the V-belt
case.
3. Install the V-belt case drain screw and its new
gasket, and then tighten the screw to the
specified torque.
8-23
2
1