Tilt Support Knob; Top Cowling Lock Lever; Trim Meter - Yamaha 20D Owner's Manual

GB
EMU00155

TILT SUPPORT KNOB

Power trim/tilt model
To keep the outboard motor in the tilted-
up position, push the tilt support knob
under the swivel bracket.
403054
EMD62010

TOP COWLING LOCK LEVER

To remove the engine top cowling, push
the lock lever downward. Then lift off the
cowling. When replacing the cowling,
check to be sure it fits properly in the rub-
ber seal. Then lock the cowling again by
moving the lever upward.
301012
EMU00132

TRIM METER

(for Power trim/tilt model)
Optional
This meter shows the trim angle of your
outboard.
NOTE:
YAMAHA
Memorize the trim angles that work best
for your boat under different conditions.
801011
Adjust the trim angle to the desired set-
ting by operating the power trim/tilt
switch.
2-17