Recoil Starter Handle; Tiller Handle; Throttle Friction Knob/Screw - Yamaha 20D Owner's Manual

GB
EMC44010

RECOIL STARTER HANDLE

(If equipped)
Pull the handle gently until resistance is
felt. Then vigorously pull the handle
straight out to crank the engine to start it.
209015
EMC60010

TILLER HANDLE

(for Tiller control model)
Moving the tiller handle sideways to
adjust the steering direction.
503015
EMC64010
THROTTLE FRICTION KNOB / SCREW
(for Tiller control model)
A friction device in the tiller handle pro-
vides resistance to movement of the
throttle grip. This is adjustable for opera-
tor preference. An adjusting screw/bolt is
located within the tiller handle.
502011
To increase the resistance:
Turn the adjusting screw/bolt clockwise.
To decrease the resistance:
Turn the adjusting screw/bolt counter-
clockwise.
When constant speed is desired, tighten
the adjusting screw/bolt to maintain the
desired throttle setting.
2-7