Quick View - Orion TELETEXT 21FVD Operating Instructions Manual

TV OPERATION
NOTE:
If SLEEP is pressed when the unit is the REC
mode, the clock will count down and the picture
will shut off at the set time, but the recording
continues.
16
MUTE
To cut off the sound, press this button once. The unit will
be silenced and the symbol "MUTE" will appear on the
screen. The muting can be released by pressing MUTE
again or VOL + or –.
USING CH + OR – BUTTON
Press and release CH + or –.
For channels to change properly, they must be correctly
tuned into the unit's memory (P.12-13).

QUICK VIEW

This button allows you to go back to the last channel
selected by pressing QUICK VIEW. Press this button
again to return to the last channel you were watching.
SLEEP
To set the TV to turn off at a set time, press SLEEP on the
remote control. The clock will count down 10 minutes each
time the button is pressed in the order of 120, 110, ..., 20,
10, 0. After the sleep time is programmed, the display will
disappear and will reappear every 10 minutes. To confirm
the sleep time setting, press SLEEP once and the
remaining time will be momentarily displayed. To cancel
the sleep time, press SLEEP repeatedly until the display
turns to 0.
DISPLAY
Press DISPLAY. The current time, channel number, real
time tape counter, tape speed and VCR operation will be
indicated.
Press DISPLAY again to remove the call display.
TV/VCR mode or DVD mode
TV/VCR
Current time
11 : 30 SAT
Real Time Tape Counter
(CONTINUED)
VCR operation
CH 2 Channel No.
Auto Repeat
Tape In
01 : 30 : 21 SP
Tape Speed