Orion TELETEXT 21FVD Operating Instructions Manual page 16

TUNING THE TV CHANNELS
In certain areas of the countries which have
poor reception the Automatic Tuning System
may not tune your unit to the strongest
broadcast signal. If you are not satisfied with
the automatic tuning then select the Manual
Tuning.
TO SKIP A CHANNEL
To skip unwanted channels press CH/
PAGE to select the channel you want to
skip. Then press CANCEL. The channel
number flashes.
To cancel the skip setting, select the
skipped channel using Direct Channel
Selection, then press CANCEL.
14
MANUAL TUNING
1
Press TV/VCR to select TV/VCR
mode.
Press MENU.
Press ▲ or ▼ to select the
CHANNEL SETUP mode, then
press ENTER.
2
Press ▲ or ▼ to select the CH
TUNING mode, then press
ENTER.
3
Press the ▲ or ▼ button to select
the Colour System, PAL or
SECAM. Then press the ENTER.
4
Press or to search the
broadcast stations. Each time a
station is found the search will
stop. Press or to continue
searching until all the stations
you want are found, then press
ENTER to store the station you
have selected.
If you can not get a clear picture,
press ▲ or ▼ until the picture
becomes clear. When you have a
clear crisp picture store this
setting by pressing ENTER.
5
Press ▲ or ▼ to select the
required channel number (1-
110). Press ENTER to store
the channel number. The unit
channels can be preset to
different TV broadcast chan-
nels anytime simply by
repeating steps 4-5.
When all required stations have
been set, press MENU 3 times to
return to normal TV screen.
(CONTINUED)
TIMER REC SET
AUTO REPEAT [OFF]
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
: ▲▼
SELECT
ENTER : ENTER
EXIT : MENU
CHANNEL SETUP
CH TUNING
AUTO TUNING
CH ALLOCATION
: ▲▼
SELECT
ENTER : ENTER
EXIT : MENU
CH 1
PAL
SELECT :
OK : ENTER EXIT : MENU
CH 1
PAL
SEARCH : / F.TUNE :
EXIT : MENU
CH 1
PAL
CH : / 0-9
OK : ENTER EXIT : MENU