To Set The Clock - Orion TELETEXT 21FVD Operating Instructions Manual

Besides displaying the channel
number and functions symbols on
the screen, the unit also displays the
present time and the day of the week.
The digital clock is the 24 hour type.
NOTES:
•
During a power failure, disconnection of
the mains lead or if the MAIN POWER
(ON) Switch is switched off, the clock
and all its programmed setting will remain
in the memory for 30 minutes. If the
power failure is longer than 30 minutes
you will have to reset the present time.
•
If you want to correct the digits while
setting, press ▲ until the item you want
to correct is blinking, then press
to correct the desired setting.
Preparation
Press TV/VCR to select TV/VCR mode.
EXAMPLE:
Setting the clock to 11:30, 25 March, 2006.
1
Press MENU.
Press ▲ or ▼ to select the
SYSTEM SETUP mode, then
press ENTER.
2
Press ▲ or ▼ to select the
CLOCK SET mode, then press
ENTER.
3
Press
current date, then press ▼.
• The day of the week shown
will not be correct until you
have finished entering the
month and year settings.
4
Set the month, year and hour in
the same way as in step 3.
5
Press
minute, then press ENTER.
The time and day will be
displayed.
• You can change in 10-minutes
step by holding down
or

TO SET THE CLOCK

SYSTEM SETUP
SELECT
ENTER
EXIT
or to select the
CLOCK SET
SELECT
SET
OK
CLOCK SET
SELECT
SET
OK
or to select current
CLOCK SET
SELECT
SET
OK
button.
TIMER REC SET
AUTO REPEAT OFF
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT : MENU
CLOCK SET
LANGUAGE/SPRACHE/LANGUE
LINGUA/LENGUA
COLOUR SYSTEM AUTO
:
: ENTER
: MENU
DAY 25 SUN
MONTH 1
YEAR 2004
TIME 0 : 00
:
/ 0 - 9
:
: ENTER EXIT : MENU
DAY 25 SAT
MONTH 3
YEAR 2006
TIME 11: 00
:
: / 0 - 9
: ENTER EXIT : MENU
DAY 25 SAT
MONTH 3
YEAR 2006
TIME 11: 30
:
/ 0 - 9
:
: ENTER EXIT : MENU
11