Connection To Other Equipment - Orion TELETEXT 21FVD Operating Instructions Manual

Combination 21” flat tv and video recorder/dvd video player

Hide thumbs Also See for TELETEXT 21FVD:

Specification sheet (2 pages)

Table Of Contents

Table of Contents

Input Selection

If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the AV button.

Press the TV/VCR button to select the TV mode and

then press the AV button repeatedly to select AV1 or

AV2.

1. To connect the unit to a VCR

Press the AV button to select AV2 to use the TV as a monitor.

To Scart socket

2. To connect the unit to a TV Game

The unit can also be used as a display device for many video games. However, due to the wide variety of different types

of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the

suggested connection diagrams. Press the AV button to select AV2 to use the TV as a monitor. You'll need to consult each

component's Owner's Manual for additional information.

3. To connect the unit to a camcorder

To playback from a camcorder, connect the camcorder to the unit as shown.

Press the AV button to select AV2 to use the TV as a monitor.

If you wish to make a recording from the camcorder, follow the same instructions as recording a TV programme (P.23),

but select AV2 for the channel.

Camcorder

4. To connect the unit to another TV set (ie. a widescreen set)

Connect this unit to the other TV set using the SCART connection.

You should select the external input setting on the other TV, e.g. AV/EXT/ etc. (you may need to consult the other

TV's instructions for information on this).