Installation Opening
This unit can be installed in any dashboard having an opening as shown below. The dashboard
should be 4.75mm - 5.56mm thick in order to be able to support the unit.
Important:
Remove these two screws before installation. Otherwise, the player will not work.
1)
Insert mounting collar into the dashboard, and bend the mounting tabs out with
a screwdriver.
Make sure that lock lever
outward).
2)
Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car
body by rubber cushion.
3)
Insert trim plate.
is flush with the mounting collar. (Not projecting
EN - 57
EN