Hyundai CRM 2128SU Instruction Manual page 51

EN
RETUNE mode
RETUNE mode: Rotate the knob to choose RETUNE-S or RETUNE-L.
RETUNE-S or RETUNE-L is time length selection of TA SEEK retune interval.
RETUNE-S: Short, TA SEEK retune interval is 45 seconds.
RETUNE-L: Long, TA SEEK retune interval is 180 seconds.
Remark: RETUNE mode functions for TA during TA SEEK mode only.
MENU FUNCTION
DSP mode
Rotate the knob to choose DSP sound effect:
POP -> ROCK -> CLASSIC -> FLAT -> DSP OFF
EPS mode
ESP 12s: Selected as CD-ESP time 12 seconds, MP3-ESP time >100 seconds.
ESP 45s: Selected as CD-ESP time 45 seconds, MP3-ESP time >100 seconds.
MULT ON/OFF
Multi Session on/off (Multi session off: mixed CD, ONE session CD; Multi session on: Mixed,
Extra, multi session CD)
LOUD mode
Rotate the knob to choose loudness on or off.
BEEP ON/OFF
Rotate the knob to choose button beep sound on or off.
SEEK 1 / 2 mode
Rotate the knob to choose radio seek mode 1 or 2 .
SEEK 1: Searching station will stop when the next station is received.
SEEK 2: Searching station will stop when  or  a button is released and next station is recei-
ved.
STEREO/MONO mode
Rotate the knob to choose FM stereo or mono.
LOCAL/DX mode
Rotate the knob to choose tuner sensitivity local or distant.
VOL LAST/ADJ mode
Rotate the knob to choose VOL LAST mode, the turn on volume level is the volume level of
latest power off.
Rotate the knob to choose VOL ADJUST mode, press to enter A-VOL, then rotate the knob to
set the turn on volume level.
EN - 51