Advertisement
ENGLISH
of the hedge trimmer will reduce possible
personal injury from the cutter blades.
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
operation the cable may be hidden in shrubs
and can be accidentally cut by the blade.
The intended use is described in this instruc-
tion manual. The use of any accessory or
attachment or performance of any operation
with this tool other than those recommended
in this instruction manual may present a risk of
personal injury and/or damage to property.
Always check the hedge/work area for foreign
objects before starting.
If you have not used a hedge trimmer before,
preferably seek practical instruction by an
experienced user in addition to studying this
manual.
Proper handling
Cutter blades contact-
During
Never touch the blades while the tool is run-
ning.
Never attempt to force the blades to come to a
standstill.
Do not put the tool down until the blades have
come to a complete standstill.
Regularly check the blades for damage and
wear. Do not use the tool when the blades are
damaged.
Take care to avoid hard objects (e.g. metal
wire, railings) when trimming. Should you
accidentally hit any such object, immediately
switch the tool off and check for any damage.
Should the tool start to vibrate abnormally,
immediately switch it off and check for any
damage.
If the tool stalls, immediately switch it off.
After use, place the blade sheath supplied over
the blades. Store the tool, making sure that the
blade is not exposed.
when using the tool. Never attempt to use an
incomplete tool or a tool with unauthorised
Never allow children to use the tool.
Be aware of falling debris when cutting the
higher slides of a hedge.
Advertisement
