Advertisement
In order to achieve optimum cutting results,
only cut dry grass.
other hand well away from the blade. Maintain
a stable working position so that you do not
slip. Do not overreach.
When cutting long grass, work in stages from
the top. Take small cuts.
Keep the tool away from hard objects and
delicate plants.
If the tool starts running slowly, reduce the
load.
To make a closer cut, slightly tilt the tool.
Slightly tilt the tool (up to 15° relative to the
line of cut) so that the blade tips point slightly
blades to cut more effectively.
Start by trimming the top of the hedge. Hold
the tool at the desired angle and move it stead-
sided blade allows you to cut in either direction.
In order to obtain a very straight cut, stretch a
piece of string along the length of the hedge
at the desired height. Use the string as a
guideline, cutting just above it.
the growth. Younger stems move outwards
when the blade cuts downwards, causing shal-
low patches in the hedge.
Take care to avoid any foreign objects.
Especially avoid hard objects such as metal
wire and railings, as these could damage the
blades.
Regularly oil the blades.
Disposal
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black &
Decker product needs replacement, or if it is of
no further use to you, do not dispose of it with
household waste. Make this product available
for separate
collection
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials
helps prevent environmental pollution and
reduces the demand for raw materials.
ENGLISH
Advertisement
