Advertisement
ENGLISH
Tool shown is EVO183. Other tools are available
for use with this tool head.
This tool includes some or all of the following
features.
10. Garden Shear/Hedge trimmer head
11. Grass shear blade
12. Hedge trimm blade
13. Blade release button
14. Blade cover
15. Lock off button
16. Grass shear blade cover
17. Hedge trimm blade cover
Before attempting any of the following
operations, remove the battery from the tool and
make sure that the saw blade has stopped. Used
saw blades may be hot.
The shear blade (11) has been designed for trim-
ming grass and weeds. The trim blade (12) has
been designed for trimming hedges and shrubs.
Hold the tool away from the body
Push and hold the blade release button (13) in
Slide the blade cover (14) backward and lift off
Lower the blade onto the pins (B3).
The retaining magnet (18) will keep the
blade secured to garden shear/hedge trimmer
head.
Replace the blade cover (14) and slide it
Alignment of the blade with the drive pin
and alignment of the back of the blade and the
blade cover.
Ensure the forward reverse slider (2) is not
in the locked position.
To switch the tool on, pull the lock off button
(15) then press the variable speed switch (1).
The tool should always be run at full speed.
Release the lock off button.
To switch the tool off, release the variable
speed switch.
Advertisement
