Intended use Remember that the operator may be held responsible for Your Black & Decker strimmer GL680/GL690 has been designed accidents or hazards occurring to other people or their for trimming and finishing lawn edges and to cut grass in property.
Page 5
Do not expose the appliance to rain or high humidity. 13. Cutting line 14. Line storage pouch 15. Tube 16. Spool storing position Do not use heavy duty line in edging mode. Assembly Warning! Before assembly, make sure that the tool is Before using the appliance, check that your cutting path is free from sticks, stones, wire and any other objects.
Fitting the heavy duty cutting line (fig. G & L) Adjusting the height of the tool (fig. F) Your strimmer will reach you with the Reflex plus spool installed. This tool has a telescopic mechanism, allowing you to set it to To fit the HDL Heavy Duty Line cutting system, proceed as follows: a comfortable height.
Complete cassettes containing a spool of cutting line are also Fitting a new piece of heavy duty cutting line (fig. G & L) available (cat. no. 6488). Replacement pieces of heavy duty cutting line are available Unplug the tool. from your Black & Decker dealer (cat. no. A6487). To fit a new Keep the tabs (18) depressed and remove the spool cover piece of cutting line, proceed as follows: (19) from the housing (12) (fig.
Protecting the environment If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 Black & Decker provides a facility for recycling months from the date of purchase, Black & Decker guarantees Black &...