Black & Decker GL20 Original Instructions Manual

Hide thumbs Also See for GL20:




Table of Contents

Summary of Contents for Black & Decker GL20

  • Page 1 GL20...
  • Page 2 Copyright Black & Decker...
  • Page 4 20 °...
  • Page 5 E N G L I S H N E D E R L A N D S N O R S K 1. Insert one end of a new piece of 1. Steek een uiteinde van een nieuw stuk 1. Før enden av en ny trimmertråd inn i cutting line into the hole.
  • Page 6: Intended Use

    E N G L I S H STRIMMER GL20 CONGRATULATIONS! INTENDED USE You have chosen a Black & Decker tool. Our aim is Your Black & Decker strimmer has been designed to provide quality tools at an affordable price. for trimming lawn edges and to cut grass in We hope that you will enjoy using this tool for confined spaces.
  • Page 7 E N G L I S H Work area When not in use, the appliance should be Do not expose the appliance to rain. Do not stored in a dry place. Children should not have use the appliance in damp or wet conditions. access to stored appliances.
  • Page 8: Electrical Safety

    E N G L I S H Switch off, remove the plug from the socket This appliance is double insulated in and ensure that moving parts have stopped accordance with EN 60335; therefore no rotating before leaving the appliance earth wire is required. unattended and before changing, cleaning or inspecting any parts of the appliance.
  • Page 9: Carton Contents

    E N G L I S H Never use the tool unless the guard is Never use a light socket. properly fitted. Using an extension cable Fitting a new piece of cutting line (fig. C & D) Always use an approved extension cable suitable Replacement packs containing pieces of pre-cut for the power input of this appliance (see rating cutting line are available from your Black &...
  • Page 10: Maintenance

    E N G L I S H To switch the tool off, release the the Tool does not start on/off switch. Check that the power cables are properly connected. Never attempt to lock a switch in the on Check the mains fuses. position.
  • Page 11 E N G L I S H If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless: The product has been used for trade,...
  • Page 12 TYP. GL20S/ GL225/ GL425 GL20S GL20SC GL225/225S/225SC/225C GL425/425S/425SC E13003 24 - 07 - 2000...
  • Page 15 Australia WALT Industrial Power Tool Company Tel. 03 9895 9200 7 Clarice Road Fax 03 9899 7465 Box Hill, Victoria 3128 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnson Drive Fax 09 579 8200 Penrose, Auckland, New Zealand South Africa Black &...
  • Page 17 574792-11...

Table of Contents