Operation And Adjustment - NordicTrack T14.0 NETL12710.2 User Manual

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT
Your treadmill features a walking belt coated with high-
performance lubricant. IMPORTANT: Never apply sili-
cone spray or other substances to the walking belt
or the walking platform. Such substances will dete-
riorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunc-
tion or break down, earthing provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a power cord
having an equipment-earthing conductor and an earth-
ing plug. IMPORTANT: If the power cord is dam-
aged, it must be replaced with a manufacturer-
recommended power cord.
DANGER:
the equipment-earthing conductor can result
in an increased risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the product is
properly earthed. Do not modify the plug pro-
vided with the product—if it will not fit the
outlet, have a proper outlet installed by a
qualified electrician.
Improper connection of
Follow the steps below to plug in the power cord.
1. Plug the indicated end of the power cord into the
socket on the treadmill.
Socket on Treadmill
2. Plug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with
all local codes and ordinances. Note: Your power
cord may look different than the one shown below.
UK
Outlet
16
Power Cord
Australia
Outlet