Maintenance And Specification; Maintenance And Cleaning The Unit; Techincal Specification - DAD FZ10004 User Manual

- 4 - MAINTENANCE AND SPECIFICATION

4.1 MAINTENANCE AND CLEANING THE UNIT

During normal operation your amplifier will provide trouble-free service. The only user maintenance re-
quired is to periodically vacuum clean the foam dust-filters behind the front grille.
In some extreme cases it may be necessary for authorized service personnel to clean the inside of the am-
plifier. These conditions usually occur after prolonged use in extreme environments such as those using
cracked oil smoke machines. If you are using your amplifier in a heavy duty application, it is recommended
to have your amplifier serviced every 1 years purely as a preventative action.
4.2 TECHNICAL SPECIFICATION
Technical Data
8 Ohm stereo power (all ch.s driven)
4 Ohm stereo power (all ch.s driven)
2 Ohm stereo power (all ch.s driven)
4 Ohm bridge power (per ch.)
Performance with Gain
Frequency response
THD at 1 kHz and 1dB below clipping
Slew rate
Output impedance at 100 Hz
S/N rate
Input gain
Input impedance
Protection
Power voltage / frequency
Dimensions (WxHxD)
Net weight
Gross weight
FZ10004
FX10004
1300Wx4
2100Wx4
2500Wx4
5000Wx2
35dB and VL:150 V
6.8Hz-34Khz@ 8 Ohm -3 dB
<0.05%
>20V/us
56mOhm
>112dB
23-26-29-32-35-38-41-44 dB
20kOhm
Voltage Limiter, (VL) Over-heat, VHF, VLF Short-circuit, DC, Power Limiter (PL)
230V /50Hz
482x88x430 mm
13.50 Kg
15.50 Kg
21