Installation; Unpacking; Mounting - DAD FZ10004 User Manual

10

- 2 - INSTALLATION

2.1 UNPACKING

Carefully open the shipping carton and check for any noticeable damage. The power amplifier is tested
and inspected before leaving the factory and should arrive in perfect condition. If any damage is discov-
ered, please notify the shipping company immediately. Only the consignee may institute a claim with the
carrier for damage incurred during shipping. Save the carton and packing materials. Inspection. Should
you ever need to ship the amplifier, always use the original packaging materials.

2.2 MOUNTING

Free airflow from front-to-rear of the amplifier must be possible. Therefore, no doors or rack-lids should
be mounted in front of or behind the amplifiers. Amplifiers may be stacked directly on top of each other.
There is no need for spacing in between units, though this might enable more convenient installation
of cabling on the rear panel. It is recommended that rear supports be mounted for maximum long-term
stability. Rear support brackets are included.
Alternative 1:
use washer for fixed installation.
FZ10004
Standard Accessories (package Included)
M A
D E I
N C
H I N
A
Alternative 2:
use tube for flexible - depth installation.
M A
D E I
N C
H I N
A
Fig.7 - Rear support bracket