Method For Amp Module Hot Plug - DAD FZ10004 User Manual

FZ10004
9

1.5 METHOD FOR AMP MODULE HOT PLUG

How to:
Push in: - Stir the plug in/out bar to the handle (right side), and then push into the bottom of slot directly.
It's only can be used after an indicative sound from the auto-lock switch that means the module is posi-
tioned. (It is very important to make sure that the module has been pushed in completely).
Pull out: - When need to pull out the module, stirring the plug in/out bar to the handle (right side), the
module will draw out from the position automatically, and then pull out the module easily and simple.
Please insert/pull by one time only due to AMP module featuring high power connection.
Idling Auto-lock Device
Plug In/out Bar
Handle
Auto-Lock Switch
Idling Auto-Lock in
Fig.6