Silvercrest SAB 160 A1 Operating Instructions Manual page 33

Handling and operation
Caller lists
♦ Press the
♦ Press the
♦ Turn the multi controller to select between the following displays:
–
–
♦ Press the
subsequently shows the last incoming (IN CALL) and/or dialled (OUT CALL)
call number.
♦ Turn the multi controller to show the last 20 received and/or dialled call
numbers one after the other.
♦ Press the
♦ Press the
Telephone book function
You can transfer up to 20 contacts (Telephone book entries) from the connected
mobile phone to the device and thus dial and call the contact from the device.
NOTICE
► Details for the transference of the contact via Bluetooth can be obtained
from the operating instructions of your mobile phone.
► Each transfered contact is fi led in the memory slot
have already been transfered are automatically fi led one memory slot
further (PB02, etc).
♦ Press the
♦ Turn the multi controller to select the display
♦ Press the
Subsequently PB01 appears and the name and call number of the fi rst
memory slot is shown.
♦ Turn the muti controller to select additional telephone book entries.
♦ Press the
♦ Press the
SAB 160 A1
PHONE button on the device. CALL LIST appears in the display
PHONE button again. IN CALL appears in the display.
IN CALL
: Shows the last 20 incoming calls.
OUT CALL
: Shows the last 20 outgoing calls.
PHONE button again. READING appears in the display and
button to dial the selected call number.
button to end redialling and exit the caller list.
PHONE button on the device. CALL LIST appears in the display
PHONE button again. READING appears in the display.
button to dial the selected call number.
button to end the call and exit the directory function.
PB01. The contacts that
PH BOOK.
GB
CY
31