Trimming Hairs In The Ears; Cleaning And Care - Silvercrest SNHT 1.5 B2 Operating Instructions Manual

Trimming hairs in the ears

GB
CY
WARNING - RISK OF INJURY
► Do not insert the cutting head
1) Remove (if fi tted) the comb attachment
head 1.
2) Guide the cutting head
3) Slide the on/off switch
4) Use circular motions so that all unwanted hair growth is removed.
5) Switch the appliance off by sliding the on/off switch

Cleaning and Care

WARNING - PROPERTY DAMAGE
► NEVER submerse the appliance in water or other liquids!
► NEVER hold the hand element
► Do not use sharp objects when cleaning the cutting head
► Do not use abrasive, aggressive or chemical cleaning
agents.
Clean the appliance after every use:
■ To remove hair from the cutting head
ments 7/8, clean them with the cleaning brush 9.
■ Wipe the hand element
soiling use a mild detergent on the cloth.
■ Clean the comb attachments
NOTICE
► Do not use the appliance again until it has completely dried.
8
1 too deeply!
7/8 from the cutting
1 carefully into the ear.
3 upwards.
4 under running water!
1 and the comb attach-
4 with a moist cloth. For stubborn
7/8 under running water.
3 downwards.
1.
SNHT 1.5 B2