First Use - Zanussi ZJB9476 User Manual

Important! This function stops automatically after 52
hours.
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)
4. Temperature indicator
5. Temperature regulator (coldest)
6. Action Cool light
7. Action Cool switch
Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
Switching off
The fridge is shut off by pressing the ON/OFF switch until
the Pilot light and the Temperature indicator switched off.
Temperature regulation
The temperature can be adjusted between +2°C and +8°C.
By pressing the Temperature regulators, the current tem-
perature setting flashes on the Temperature indicator. It
is possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature, press
warmest Temperature regulator. To set a colder temper-
ature, press coldest Temperature regulator. The Temper-
ature indicator displays the newly selected temperature
for a few seconds and then shows again the inside com-
partment temperature.
The newly selected-temperature must be reached after 24
hours.

First use

Cleaning the interior
Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm water
and some neutral soap so as to remove the typical smell
of a brand-new product, then dry thoroughly.
It is possible to deactivate the function at any time by
pressing Action Freeze switch. The Action Freeze light will
switch off.
Fridge Control panel
1 2
Caution! During the stability period by the first
starting the temperature displayed can not
correspond to the setting temperature. During this time it
is possible that the temperature displayed is lower than
the setting temperature.
Temperature indicator
During normal functioning the Temperature indicator
shows the temperature inside the fridge.
Important! Difference between the temperature displayed
and temperature setting is normal. Especially when:
• a new setting has recently been selected.
• the door has been left open for a long time.
• warm food has been placed in the compartment.
Action Cool function
The maximum performance is obtained by setting the Ac-
tion Coolfunction. It's recommended when loading large
quantities of food.
You can activate the Action Cool function by pressing the
Action Cool switch.
The Action Cool light will light up.
Important! The internal temperature goes down to +2°C.
After about 6 hours the Action Cool function switches off
automatically.
Important! Do not use detergents or abrasive powders,
as these will damage the finish.
3 4 5 6 7
5