Environmental Concerns - Zanussi ZJB9476 User Manual

820
870
170
220
140
190
30
100
• If using a 140 to 170 mm plinth, make a cut-out as
shown.
Alignment height of 870 mm
100
150
30
100
• If using a 190 to 220 mm plinth, make a shown.
• If using a plinth higher than 150 mm but less than 190
mm, cut the height compensation strip supplied with
the appliance to the required depth and fit it between
the plinth and the ventilation grille.
• If using a 150 mm plinth, fit the complete height com-
pensation strip.

Environmental concerns

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
14
140
190
• If using a plinth higher than 100 mm but less than 140
mm, cut the height compensation strip supplied with
the appliance to the required depth and fit it between
the plinth and the ventilation grille, pressing it into
position below this grille.
• If using a 100 mm plinth, fit the complete height com-
pensation strip.
E
• If the appliance is installed at the end of a row of units,
insert foot E to hold the plinth in place.
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contact your local council, your household waste disposal
service or the shop where you purchased the product.