Command And Response Table For Sis Commands - Medialink MLC 62 IR D User Manual

Command and Response Table for SIS Commands

Command
Button Selection
Trigger a button
NOTES:
• When you press a dual-sized button, such as the Input buttons on the MLC 64, different numbers
appear on your screen depending on which side of the button is pressed. For example, if you press
the left side of the
side of that button receives the response
command is issued regardless of which side is pressed.
• Use the configuration software to configure the buttons with commands.
Example
Discrete Audio Volume Adjustment on Devices with Volume Tables (MLC 62 RS models only)
Set volume level
14
NOTE: Only positive values are allowed. Volume table levels start with
level that is outside of the volume table range results in an
Increment volume level
Decrement volume level
View current volume level
Increase and Decrease Audio Volume on Devices without Volume Tables (MLC 62 models only)
NOTE: Attempts to enter an X(
whose driver does not include a volume table result in an
Increment volume level
Decrement volume level
View volume level
ASCII Command
(Host to Unit)
E X! }
B* BTNO
button on an MLC 64, the host response is
PC
BtnoB*4
E }
B*5BTNO
X(
V
+V
–V
V
(Set volume level) command to set a discrete volume level on a device
V
+V
–V
V
Response
Additional Description
(Unit to Host)
X! ] Execute the commands
BtnoB*
programmed to button
command produces the same
results as pressing button
the front panel).
X!
08
BtnoB*3
. The entire button lights, however, and the same
] Perform commands assigned to
BtnoB*05
button 5.
X( ]
Vol Set volume table level to
can be up to 3 digits; leading
zeros are optional.
(zero). Setting a discrete volume
0
error response.
E13
X( ] Increase the volume by one
Vol
volume table increment.
X(
X( ] Decrease the volume by one
Vol
volume table increment.
X( ] Display the current volume level.
error response.
E14
] Increase the volume level by one
Vol+
step.
] Decrease the volume level by
Vol–
one step.
]
---
MLC 60 Series MediaLink Controllers • SIS Control
X!
. (This
X!
on
, , , , , ,
01 02 03 04 05 06 07
=
, , or
09 10
.
, while pressing the right
X( X(
.
= current volume level.
,
60