Mounting The Mlc 64 Rs Vc D - Medialink MLC 62 IR D User Manual

Mounting the MLC 64 RS VC D

Mounting an MLC 64 RS VC D to an electrical junction box
ATTENTION:
• Ensure that the junction box is grounded properly.
• Assurez vous que le boîtier d'encastrement est correctement mis à la terre.
1. Mount a two-gang electrical junction box in the wall or furniture, following the
directions provided with the box.
2.
Run the cables through the electrical box.
3. Connect all cables and disconnect power from all devices at the source.
4. Place the MLC and VCM units side-by-side into the mounted electrical box.
5. Secure the MLC and VCM to the box using the provided screws in the oval slots at
the top and bottom of the two boards.
6.
Fasten the wallplate onto the unit using the four provided black or white screws in the
holes at the top and bottom of the wallplate.
Wa ll Box
Figure 37.
MLC 60 Series MediaLink Controllers • Features, Installation, and Operation
MLC 64 VC D
Mounting an MLC 64 D to an Electrical Box
Wall
M E
L U
V O
Y
L A
S P
D I F
O F
O N
P C
T E
O P
M U
P T
L A
A M
C C
D O
E O
V I D
Wallplate
36