Features, Installation, And Operation; Installation Overview - Medialink MLC 62 IR D User Manual

Features,
Installation, and
Operation
This section describes the front, side, and rear panel features of the five MLC models, and
provides procedures for installing and operating them. Topics include:
•
•
•
•
•
•
•
•
•

Installation Overview

1.
2.
3.
Installation Overview
Front and Left Side Panels
Installation
Configuring the MLC via the USB Port
Mounting the MLC 60 Series Controllers
Accessing Covered Panel Features After Mounting
Front Panel Security Lockout
Resetting the MLC Using the Reset Button
IR Learning
Prepare the installation site as follows:
a. Measure and cut the hole in the mounting surface (see
Series Controllers, beginning on page 34).
b. Prepare and pull the cables through the electrical box or mounting bracket.
c. Install the electrical box or mounting bracket. (Installation instructions for the
electrical box are provided with it.)
(Optional) Make desired changes to the buttons installed in the faceplate, substituting
any of the provided additional buttons (see
NOTE: The button on the MLC 64 volume control module cannot be
Mute
changed.
Attach the cables to the rear panel connectors of the MLC and to the display device
or switcher. Attach optional IR Emitters if used, and any switches or sensors needed
for other room devices, such as lights, a motorized screen, and so forth). See the
following sections as needed for cabling information:
Rear Panel Features
•
Wiring for RS-232 Control (RS Models Only)
•
Wiring for IR Control
•
Wiring the Relays Port (RS Models Only)
•
Wiring the Digital Input Port (RS Models Only)
•
MLC 60 Series MediaLink Controllers • Features, Installation, and Operation
Mounting the MLC 60
Replacing Buttons on page 23).
8