Removing The G7052 From A Standard Equipment Rack - Lenovo RackSwitch G7052 Installation Manual

Removing the G7052 from a Standard Equipment Rack

© Copyright Lenovo 2015
This section describes how to remove the G7052 from a standard 19-inch
equipment rack. For information about removing the switch from other supported
racks, see the appropriate section in this chapter.
To remove the G7052 from a standard rack, complete the following steps:
1. If the power cord retention clip is installed, remove it:
2. Disconnect all external cables.
3. If the air-duct option has been installed, remove it as described in
the Air-Duct Option" on page 65.
Chapter 4: Removing and Replacing G7052 Components
"Removing
57