Installing The G7052 In A Lenovo System X Or Power Rack - Lenovo RackSwitch G7052 Installation Manual

Installing the G7052 in a Lenovo System x or Power Rack

38
G7052 Installation Guide
This section describes how to install the G7052 in a Lenovo System x
4-post rack, using the Lenovo Adjustable 19" 4-Post Rail Kit.
This kit must be purchased separately. It includes the following parts:
Table 8. Lenovo Adjustable 19" 4-Post Rail Kit parts
Item number Description
Switch front bracket
1
M4 screws
2
M6 screws
3
M6 clip nuts
4
M6 cage nuts
5
M3.5 screws
6
Rear mounting bracket
7
Rear mounting bracket with cord exit
8
Filler plate
9
M6 locking washers
10
Note: When using a System x or Power 4-post rack, the 4-Post Rail Kit is
compatible with the optional air-duct kit (available separately). See
the Air-Duct Option" on page 47
Statement 26
CAUTION:
Do not place any object on top of rack-mounted devices.
To install the G7052 in a System x or Power rack, complete the following steps:
1. Locate, record, and retain the product switch information in order to configure
and register your product. See
page 30.
Note: If this switch is a replacement switch, copy the product information from the
original switch onto the RID label that is shipped with replacement switch
and affix the new label to the bottom of the new switch.
Quantity
for details.
"Recording Important Product Information" on
®
or Power
2
16
8
8
8
4
1
1
1
8
"Installing