Removing The G8296 From A Standard Equipment Rack - Lenovo RackSwitch G8296 Installation Manual

Removing the G8296 from a Standard Equipment Rack

62
RackSwitch G8296 Installation Guide
This section describes how to remove the G8296 from a standard 19-inch
equipment rack. For information about removing the switch from other supported
racks, see the appropriate section in this chapter.
To remove the G8296 from a standard rack, complete the following steps:
1. Disconnect all external cables.
2. If the air-duct option has been installed, remove it as described in
the Air-Duct Option" on page
3. Loosen and remove the M6 screws and clip nuts (or cage nuts) to realease the
switch unit from the rack.
4. Slide the switch unit out of the rack.
5. Loosen and remove the M4 screws attaching the mounting bracket on each
side of the switch.
6. If replacing the unit with another G8296, see
page 68.
67.
"Replacing the G8296" on
"Removing