Try to reset the traction control system
and the lights by following the proce-
dures under "Resetting" on page 3-24.
Immobilizer system indicator
light " "
When the key is turned to "OFF" and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to "ON",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
The self-diagnosis device also detects
problems in the immobilizer system
circuits. (See page 3-17 for an expla-
nation of the self-diagnosis device.)
Multi-function meter unit
1 2
3
4
EAU54682
12
11
10
1. "RESET" button
2. "TCS" button
3. Clock
4. Tachometer
5. Speedometer
6. Transmission gear display
7. Information display selection function
8. Information display
9. Fuel meter
10.Eco indicator "ECO"
11.Drive mode display
12.Fuel level warning indicator "
The
multi-function
equipped with the following:
speedometer
tachometer
clock
fuel meter
Instrument and control functions
eco indicator
EAU63143
transmission gear display
drive mode display
5 6 7
information display
setting mode display
GEAR
N
A.TEMP
˚C
25
C.TEMP
˚C
Lo
TIME TRIP
Be sure to stop the vehicle before
0:00
making any setting changes to the
multi-function meter unit. Changing
9
8
settings while riding can distract the
operator and increase the risk of an
accident.
TIP
The select switch "
The key must be turned to "ON"
"
meter
unit
is
3-6
WARNING
/
the menu switch "MENU" are lo-
cated on the left handlebar. These
switches allow you to control or
change the settings of the multi-
function meter unit.
before you can use the handlebar
switches and buttons.
EWA12423
3
" and