Yamaha TRACER MT09 TRA Owner's Manual page 39

Turning on/off the traction control
system
WARNING
Be sure to stop the vehicle before
making any setting changes to the
traction control system. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
To turn off the traction control system,
push the "TCS" button on the multi-
function meter unit for at least 2 sec-
onds. The "TCS" indicator/warning
light will come on.
To turn on the traction control system,
push the "TCS" button again. The
"TCS" indicator/warning light will go
off.
EWA15441
1
1. "TCS" button
2. Traction control system indicator/warning
light "TCS"
Resetting
The traction control system will be dis-
abled in the following conditions:
 The rear wheel is rotated with the
centerstand down and the key in
the "ON" position.
 Either the front wheel or rear wheel
comes off the ground while riding.
 Excessive rear wheel spinning.
If the traction control system has been
disabled, both the "TCS" indica-
tor/warning light and the engine trou-
ble warning light come on.
Instrument and control functions
To reset the traction control system
Turn the key to "OFF". Wait at least 1
second, then turn the key back to
"ON". The "TCS" indicator/warning
light should go off and the system will
be enabled. The engine trouble warn-
ing light should go off after the motor-
cycle reaches at least 20 km/h (12
mi/h). If the "TCS" indicator/warning
2
light and/or engine trouble warning
light still remain on after resetting, the
motorcycle may still be ridden; howev-
er, have a Yamaha dealer check the
motorcycle as soon as possible.
3-24
3