Yamaha TRACER MT09 TRA Owner's Manual page 28

Instrument and control functions
This function allows you to
check and reset the
"TIME–2" and "TIME–3"
functions. These time trips
show the total elapsed
time that the key has been
in the "ON" position. When
3
the key is turned to "OFF",
Time Trip
the time trips stop count-
ing but are not reset. The
maximum time that can be
shown is 99:59.
When the time trips reach
100 hours, they automati-
cally reset to 0:00 and
continue counting.
This function allows you to
switch the fuel consump-
tion units between
"L/100km" and "km/L".
For the UK: This function
allows you to switch the
Unit
display units between kilo-
meters and miles. When
kilometers are selected,
the fuel consumption units
can be switched between
"L/100km" and "km/L".
This function allows you to
change the items shown in
Display
3 information displays.
This function allows you to
adjust the brightness of
Brightness
the multi-function meter
unit panel.
This function allows you to
Clock
set the clock.
This function allows you to
reset all items, except the
All Reset
odometer and the clock.
Resetting the maintenance counters
1. Use the select switch to highlight
"Maintenance".
MENU
Maintenance
Time Trip
Unit
Display
Brightness
Clock
All Reset
2. Push the menu switch, and then
push the "RESET" button to select
the item to reset.
Maintenance
OIL km
20
FREE-1 km
10
FREE-2 km
10
3-13
3. While the selected item is flashing,
push the "RESET" button for 2
seconds.
4. Push the menu switch to return to
the setting mode menu.
Checking and resetting "TIME–2" and
"TIME–3"
1. Use the select switch to highlight
"Time Trip".
MENU
Maintenance
Time Trip
Unit
Display
Brightness
Clock
All Reset
2. Push the menu switch to display
"TIME–2" and "TIME–3". To reset
a time trip, push the "RESET" but-
ton to select the item to reset.