Yamaha KODIAK ULTRAMATIC YFM400FA Owner's Manual page 389

Hide thumbs Also See for KODIAK ULTRAMATIC YFM400FA:
Table of Contents

Advertisement

Engine overheating
Wait until the
Check the coolant level in the
engine has cooled.
reservoir tank and/or radiator.
NOTE:
If it is difficult to get the recommended coolant, tap water can be temporarily used, provided that it
is changed to the recommended coolant as soon as possible.
WARNING
Wait for the engine and radiator to cool before removing the radiator cap. You could be burned by
hot fluid and steam blown out under pressure. Always put a thick rag over the cap when opening.
Allow any remaining pressure to escape before completely removing the cap.
Level is low, check the
cooling system for leakage.
Restart the engine. If the engine overheats again, ask a
Level is OK.
Yamaha dealer to inspect and/or repair the cooling system.
8-132
Ask a Yamaha dealer to inspect
Leakage.
and repair the cooling system.
No
Add coolant. (See NOTE.)
leakage.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Kodiak ultramatic yfm400fwan

Table of Contents