Anti-Theft Alarm System - BMW S 1000XR Rider's Manual

Anti-Theft Alarm
4
System
46
with anti-theft alarm system
OE
(DWA)
Activate DWA
Switch on ignition (
Adjust DWA (
Switch off ignition.
If the DWA is activated, the
DWA is automatically activated
z
after the ignition is switched
off.
Activation takes approximately
30 seconds to complete.
Turn indicators are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
DWA is armed.
Alarm signal
The DWA alarm can be set off
by:
Motion sensor
Switching on ignition with an
unauthorized motorcycle key
Disconnecting the DWA from
39).
the motorcycle battery (DWA
47).
battery takes over the power
supply – alarm sound only, haz-
ard warning lights do not flash).
If the DWA battery is discharged
all functions remain operational;
the only difference is that the
alarm cannot be set off if the
system is disconnected from the
motorcycle battery.
The duration of the alarm sig-
nal is approx. 26 seconds. Dur-
ing the DWA alarm, an alarm
tone sounds and the turn indi-
cators flash. The type of alarm
sound can be set by an autho-
rized BMW Motorrad retailer.
If a DWA alarm was triggered
while the motorcycle was
unattended, the rider is notified
accordingly by an alarm tone
sounding once when the ignition
is switched on. The DWA LED
then signals the reason for the
DWA alarm for one minute.
Light signals on DWA LED
1 flash: Motion sensor 1
2 flashes: Motion sensor 2
3 flashes: Ignition switched on
with unauthorized motorcycle
key
4 flashes: DWA disconnected
from motorcycle battery
5 flashes: Motion sensor 3
Deactivate DWA
Switch on ignition (
Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
DWA is now switched off.
39).