General Instructions; Onboard Tool Kit - BMW S 1000XR Rider's Manual

General instructions

8
The 'Maintenance' chapter de-
scribes work involving the check-
122
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Information on additional main-
z
tenance and repair work is pro-
vided in the Repair Manual for
your motorcycle on DVD, which
you can obtain from your autho-
rized BMW Motorrad retailer.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work
described here. If you are in
doubt, consult an authorized
workshop, preferably your au-
thorized BMW Motorrad retailer.

Onboard tool kit

1 Hook wrench
without Dynamic ESA
Adjusting spring preload
at rear wheel (
2 Reversible screwdriver in-
sert
Phillips PH1 and Torx T25
Removing fairing side
panel ( 148).
Replacing front and
rear turn indicator light
sources ( 147).
3 Open-ended wrench
Wrench size: 14
3 Adjust mirror arm
( 82).
Headlight range adjust-
ment (
4 Open-ended wrench
Wrench size: 8/10 mm
5 Reversible screwdriver with
Phillips and straight blade
without Dynamic ESA
Adjust compression
damping on front wheel
( 86).
OE
without Dynamic ESA
Rebound-stage damping
85).
on front wheel (
without Dynamic ESA
Adjusting rebound-stage
damping at rear wheel
( 87).
6 Spare fuses with gripper
Miniature fuses, 4 A, 7.5 A
and 10 A
7 Socket wrench
Wrench size: 17 mm
8 Torx wrench T30
83).
OE
OE
87).
OE