Dynamic Traction Control - BMW S 1000XR Rider's Manual

ASC indicator and warning
light starts to light up.
Release button 1 within two
seconds.
ASC indicator and warning
light continues to be lit up.
ASC is deactivated.
Switch on ASC
Press and hold the 1 button
until the ASC -indicator and
warning light 2 changes its
display behavior.
ASC indicator and warning
light goes out, and starts
to flash if self-diagnosis has not
been completed.
Release button 1 within two
seconds.
ASC indicator and warning
light remains off or contin-
ues to flash.
ASC activated.
As an alternative, the ignition
can also be switched off and
then on again.
If the ASC indicator and
warning light lights up
after switching the ignition off
and on and then continuing to
ride at the following minimum
speed, an ASC fault has oc-
curred.
min 6 mph (min 10 km/h)
Dynamic Traction
Control
with Dynamic Traction Control
OE
(DTC)
Deactivating DTC
Switch on the ignition.
NOTICE
The DTC function can also be
deactivated while driving.
Press and hold the 1 button
until the DTC --indicator light 2
changes its display behavior.
4
49
z