Asc Intervention; Abs Error - BMW S 1000XR Rider's Manual

Fall sensor defective
3
General warning light lights
up yellow.
30
VDS!
(Vertical Down Sensor) is
displayed.
Possible cause:
A defect was determined in the
fall sensor.
Contact an authorized service
facility, preferably an authorized
z
BMW Motorrad retailer.
ABS self-diagnosis not
completed
ABS indicator light flashes.
Possible cause:
The ABS system is not available,
as self-diagnosis has not been
completed. To check the wheel
speed sensors, the motorcycle
must be driven a few yards.
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS switched off
ABS indicator light lights
up.
Possible cause:
The ABS system has been deac-
tivated by the rider.
Activating ABS ( 51).

ABS error

ABS indicator light lights
up.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available at all or is
restricted.
It is possible to continue rid-
ing the motorcycle if you make
allowance for the failed or lim-
ited ABS function. You should
also take account of the addi-
tional information on situations
that can lead to an ABS fault
( 109).
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Dealer.

ASC intervention

ASC indicator and warning
light flashes rapidly.
ASC has detected instability at
the rear wheel and responded by
reducing the torque. The warn-
ing light flashes longer than the
ASC intervention lasts. This fea-
ture continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.